AT&T Synapse Uživatelská příručka stáhnout pdf (Strana 92)

Settings 92

Synapse User’s Guide

[Handset, Headset] Cordless Accessory Registration and Deregistration Issues

[Handset, Headset] If a Password is Being Used

If you have set a user password (see “Change User Password” on page 86), the User

Password screen shown in Figure 88 displays when you begin the registration process by

pressing MENU, and then 2 to access the User Settings screen.

 Enter your password and press SELECT.

 To correct errors, use the key.

 To cancel your changes on that screen, press at any time. The set will

return to the previous screen.

[Handset, Headset] Time-out Period

For security reasons, the registration process on both Deskset and cordless accessory terminates after the time-out period of two

minutes if registration is not successful.

 If the registration process times out on the cordless accessory, the cordless accessory resets itself. The Deskset returns

to the unregistered cordless accessory startup screen.

The Handset displays Registration Failed if the process times out.

 If the registration process times out on the Deskset, it displays Registration Failed and returns to Idle mode.

If Cordless Headset registration fails, the ON/OFF light on the Headset flashes twice every five seconds. To reset the Headset,

remove the Headset from the charger and try the registration process again, beginning with Step 1, “To register the TL7600

Cordless Headset:” on page 89.

If the Cordless device is registered to another Deskset or telephone, it must be deregistered first. See “[Handset, Headset]

Deregistering a Cordless Accessory” on page 90.

Quick

Dial

User Passw ord

Enter user password:

Backspc Canc el

Use dial pad to enter user password.

Press SELECT when done.

Figure 88. Enter User Password

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 333 334

Žádné komentáře

AT&T Synapse Uživatelská příručka Strana 92