AT&T Synapse Uživatelská příručka Strana 235

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 334
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 234
Paging 235
Synapse User’s Guide
[ATA] Multi-Zone Overhead Paging
If your Synapse system includes an optional multi-zone overhead paging (OHP) system, you have an Overhead Paging option
in the paging zones list.
To page using an optional multi-zone overhead paging system:
Figure 324. Overhead Paging Zone
Figure 325. Multi-Zone Overhead
Page
1. From Idle or from a held call, press , as shown in Figure 319 on page 232.
It may be necessary to first press from Idle, or to press , then
from Hold.
The paging zones screen displays, as shown in Figure 324.
2. Select Overhead Paging.
3. Press . The system displays the multi-zone overhead page screen, as
shown in Figure 325.
If necessary, enter the desired overhead paging zone number.
4. Wait for feedback from your paging system, then speak into the speakerphone or
pick up the corded handset to speak.
5. When finished, press , hang up the handset, or press SPEAKER. You return
to the Idle screen.
Start
Paging Zones
Quick
Dial
1. All Extensions
2. Accounts
3. Design
4. Documentation
5. Management
6. Overhead Paging
Use or to scroll then press
SELECT or press digit.
EndPage
Page
Press EndPage when done.
Overhead Page
You may be required to enter additional
digits bef ore paging can begin.
Zobrazit stránku 234
1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 333 334

Komentáře k této Příručce

Žádné komentáře