
Incoming Calls 200
Synapse User’s Guide
Auto Answering
You can use the Deskset menu settings to set your Deskset to answer calls automatically, without your having to touch the phone
to answer. When you enable Auto Answer, appears at the top of the Deskset screen if and are not active,
since Auto Answer does not work if they are on.
To respond to an Auto Answered call:
Figure 265. Idle Screen with Auto
Answer Indicator
Figure 266. Call Auto Answered
In Idle mode, all incoming calls ring for the amount of time specified in the Auto
Answer Delay. See “Automatic Answering” on page 80. After the last ring, a two-
second notification screen appears, as shown in Figure 266, and you hear a warning
tone. (The caller does not hear the tone.)
Talk after the tone.
Aside from the normal options during ringing, you can press CANCEL to process the
call according the Call Forward–No Answer setting. See “Call Forward All and Call
Forward–No Answer” on page 75.
If there are multiple incoming calls, Auto Answer applies to the first (oldest) incoming
call. Subsequent incoming calls are handled according the Call Forward–No Answer
setting.
If your extension is part of a ring group, and if your Auto Answer delay setting is too
short, your extension may end up answering most of the ring group calls. See
“Automatic Answering” on page 80.
DNDDNDDND CallFw d Pag e More 1/2
Quick
Dial
12:30PM Thu Feb 23 2008
2 New Missed Calls
5 New Messages
Press or to mov e highlight, then
press
SELECT
.
EXT 249
John Smith
AA ON
Transfer
Quick
Dial
12:30PM Thu Feb 23 2008
Graham Bell 232-555-0176 2:51
Transfer Conf Pa r k Mor e 1 /3
Call Answered.
Speak after the tone.
If the Auto Answer Delay is set to zero, you hear no ring. Instead, the Call
Answered screen appears and you hear the warning tone.
Komentáře k této Příručce