AT&T Synapse Instalační příručka stáhnout pdf (Strana 47)

Synapse Installation Guide Back to Contents

Installation 46

Figure 24. ATA Analog Telephone Connections

Connecting a Fax Machine

To install a fax machine:

1. Remove the plastic covers from the FXS 1 or FXS 2 (telephone) port to be used on

the ATA.

2. Plug a telephone line from the fax machine into the ATA FXS 1 or FXS 2 port, as

shown in Figure 25.

3. Configure the fax connection in the WebUI.

For information on configuring the ATA to work with your fax machine, see the

Synapse Administrator’s Guide at

www.telephones.att.com/synapseguides.

Figure 25. ATA Fax Machine Installation

ATA

Analog Telephone/

Conference Phone

Analog Telephone/

Conference Phone

Fax Machine

ATA

If you are connecting your fax machine to the ATA and your Synapse Dial Plan

uses a number for external line access, such as 9, you should inform users that

they need to dial this number when sending faxes.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 167 168

Žádné komentáře

AT&T Synapse Instalační příručka Strana 47