AT&T Telephone R1V2 Uživatelský manuál Strana 33
- Strana / 156
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Administration Password
To change the
1 From the Main menu prompt, enter 4.
administration password
2 At
Action = , enter 75.
3 At
Data = , enter the new password (eight or fewer
printable characters, with no spaces). For security, the
display always shows ????????.
Toll Calls Allowed (TCA) Lists
There are four Toll Calls Allowed Lists. Therefore, you must specify a target value from 1
through 4 to access these lists.
The total number of entries must not exceed 64 for all 4 lists
combined.
To access a Toll Calls
1 From the Main menu prompt, enter 7.
Allowed List
2 At the prompt,
TOLL ALLW= , enter the number, from 1
through 4, of the list you want to access.
Continue to administer the Toll Calls Allowed List as
described below.
To list members of a TCA
1 At
Action = , enter 1
group
2 To continue the list, enter c after each code is printed.
To add a code to the list 1 At
Action = , enter 2.
2 At
Data = , enter the code number in the form NXX or
NPA-NXX, where:
■ NXX is a 3-digit CO exchange code
■ NPA-NXX is a combination of an area code (NPA) and
a CO code (optionally separated by a hyphen)
You can use the WILDCARD character (•) in the CO
exchange code part (NXX) of these codes. That is, you can
enter NXX as NXX, NX•, N••, or •••.
To specify an entire NPA, enter NPA-•••.
Administering System-Wide Options 4-7
- AT&T SYSTEM 25 1
- System 25 Documents 4
- Contents 5
- Administering Data Line and 6
- STARLAN CP Ports 6
- Introduction 9
- Using this Manual 10
- How to Use the System 11
- Correcting Typing Errors 12
- Making Backup Tapes 12
- Main Menu Items 13
- Administration Commands 14
- Command Functions 15
- Action Groups 17
- Display Support IDs 18
- System Responses 20
- Print Messages 21
- Warning Messages 21
- Initializing the System 22
- Limited Default Cold Start 23
- Unassigned Trunk Ports 23
- Initialization Sequence 24
- 3-4 Initializing the System 25
- TABLE 3-2 26
- (continued) 26
- Initializing the System 3-5 26
- Toll Restriction Options 27
- Call Coverage Options 28
- Pooled Modem Options 29
- Time of Day 30
- Call Accounting Options 31
- Miscellaneous System Options 32
- Expert Mode Prompt 32
- Administration Password 33
- Floating PDCs (FPDCs) 34
- Virtual Facilities 35
- System Speed Dialing 36
- Administering Trunks 37
- TABLE 5-1 Trunk-Type Codes 38
- Action=2 38
- 5-2 Administering Trunks 38
- Removing a Trunk 39
- 5-4 Administering Trunks 40
- Class-of-Service Options 41
- Display Support 43
- DGC Delay Announcement 46
- Music-on-Hold 46
- Pooled Modem 47
- Additional Tone Detector 47
- Dictation 47
- Administering Voice Stations 48
- Removing a Voice Station 49
- Changing a Station Dial Code 50
- Moving a Voice Station 51
- ■ 0 for none 53
- Multiline Voice Stations 54
- Adding a Data Station 58
- Removing a Data Station 59
- Changing a Data Dial Code 60
- Moving a Data Station 60
- Assigning Class-of-Service 61
- Default Attendant Assignments 67
- Move an Attendant Console 69
- Change an Attendant PDC 69
- Remove an Attendant Console 69
- Assigning Features to Buttons 78
- Default Button Assignments 78
- Selector Console (DXS) 79
- Button Assignment Tables 80
- Consoles 83
- ARS Patterns 92
- Define Subpattern B 94
- Remaining ARS Patterns 95
- Home Area Code Exception List 96
- ARS Digit Translation Tables 98
- Using the Digital Tape Unit 100
- Save Your Translations 101
- Verify the Saved Translations 102
- INITIATED WARM START 104
- RESTORE FAILED 104
- System Searches 105
- Display Support Searches 113
- Listing Circuit Packs 115
- Command Reference 118
- † Read-only feature for SLAC 120
- ‡ Not administrable for SLAC 120
- 16-4 Command Reference 120
- 16-6 Command Reference 122
- 16-8 Command Reference 124
- † Cannot be changed 126
- 16-10 Command Reference 126
- * Read-only for STARLAN CP 128
- 16-12 Command Reference 128
- 16-14 Command Reference 130
- TABLE 16-12 Trunk Type Codes 131
- TABLE 16-16 Port Options 135
- 16-20 Command Reference 136
- 16-22 Command Reference 138
- 16-24 Command Reference 140
- 16-26 Command Reference 142
- 16-28 Command Reference 144
- 16-32 Command Reference 148
- 16-34 Command Reference 150
- Requirements for the SAT 152
Související produkty a manuály pro ne AT&T Telephone R1V2
ne AT&T 982 Uživatelský manuál
(1 stránky)
(1 stránky)
Hotpoint HDA3600 manuály
Uživatelské manuály a uživatelské příručky pro Myčky nádobí Hotpoint HDA3600.
Poskytujeme 1 manuály pdf Hotpoint HDA3600 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Komentáře k této Příručce