AT&T DEFINITY 7300 series Manuál s instrukcemi Strana 261

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 438
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 260
MAINTENANCE
2.
3.
4.
If you hear dial tone, continue with this test.
Dial the digits 1234567890 *#.
Y
OU should hear a DTMF signal as each key is pressed.
If the test passes, you will hear dial tone within 1 to 3
seconds after you enter #.
Repeat the test for each touch-tone receiver.
Replace the Service Circuit CP if this test fails.
7300H Series Terminal Troubles
Symptoms:
7300H Series terminal LEDs and/or tones not functioning properly.
Procedures:
1.
Move the T/P lever on the left-hand side to the “T” (Test) position,
and hold it there.
2. Release
3. If any
Symptoms:
Voice
Tone ringing should be heard.
All the red and
alternately while
the lever, letting
green LEDs on the terminal should flash
the lever is held in this position.
it return to its normal position.
Ringing tone should be silenced, and the LEDs should be
dark.
part of the test fails, replace the terminal.
terminal keys don’t click.
4-84
Zobrazit stránku 260
1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 437 438

Komentáře k této Příručce

Žádné komentáře